Model HDHU.9813RG
Owner’s manual and specifications for the HDHU.9813RG head unit.
| Power Requirement | DC 10 - 16Volts, Negative ground |
|---|---|
| Current Drain | 15A (Max.) |
| Maximum Power Output | 50Watts x 4 |
| RMS Power Output | 25Watts x 4 |
| Speaker Impedance | 2- or 4-Ohm Load |
| Frequency Response | 20Hz ~20KHz |
| Operating temperature | -20~60 ℃ |
| Dimensions | 230mm(W) x 210mm(D)x 140mm(H) |
| TFT Screen size | 7 – Inch TFT/LCD |
| Resolution | 1024x600 pixels |
| Line-out / Subwoofer Output | ≥4 V RMS |
Source: Owner’s Manual, Soundstream. Wording and values are retained from the supplier document.
The complete text of the Owner’s Manual for HDHU.9813RG (30 pages), extracted from the supplier PDF; pages without a text layer were transcribed from the page image. Check wiring and settings against the original PDF before cutting or splicing.
RESERVE Owner's Manual | EN OEM UPGRADE HEAD UNIT FOR 1998-2013 HARLEY DAVIDSON® ROAD GLIDEMOTORCYCLES HDHU.9813RG RESERVE 14:25 .ıll 穼 Phone Music Maps Messages Now Playing SoundStream Podcasts Audiobooks Works with Apple CarPlay android auto IPx6 WATERPROOF FACEPLATE MOSFET MAX 75W × 4 2 Ω Speaker SOUNDSTREAM TECHNOLOGIES ((SiriusXM)) READY Bluetooth HDHU.9813RG
Contents Safety First Safety Definitions | 2 Pre-Riding Check list | 3 Care and cleaning | 3 Screen | 3 Appearance | 3 Accessories & Installation | 4 Installation | 5 Headunit Control | 6 Wiring | 8 Harness | 10 Operation Main menu | 11 Setting | 11 Apple CarPlay/Android Auto | 16 Radio operation | 18 USB operation | 18 Bluetooth Music | 19 Bluetooth Phone | 20 SiriusXM Ready | 21 Camera in | 27 Specification | 28 Trouble Shooting | 29 FCC Notes | 30 Safety First Safety Definitions Statements in this manual preceded by following words are of special significance: WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. WARNING Set volume levels and other controls on audio and electronic devices before riding. Distractions can lead to loss of control, resulting in death or serious injury. WARNING Do not select a volume level that blocks out traffic noise or interrupts the concentration necessary for the safe operation of the Motor- cycle. Distractions or a volume level that blocks our traffic noise could cause loss of control resulting in death or severe injury. Note Pay attention while riding, keeping your eyes and clear mind on the road. Some features are locked out to prevent distraction, limited in capability while the Motorcycle isin motion. Even a part is available, donot allow it to distract you from operating your Motorcycle safely. For safety, program the system when stopped. Perform system setup and get familiar with the controls and features of the infotainmentsystem before operating the Motorcycle on the road. This system cannot warn about the safety of an area, bad road conditions, and availability of emergency services. Use this radio only in locations where it is safe to do. 2
Pre-RIDING Appearance Check list Configure the system with your personal preferences before riding to use features and minimize distractions while on the road entirely. 1. Set brightness, background. 2. Configure presets. 3. Adjust audio settings like EQ, volume, fade, balance etc. before ridding. 4. Pair, connect and set up phone features through Bluetooth. 5. Connect USB devices for Apple CarPlay® or Android Auto®. 6. Selectstation or media CARE AND CLEANING Use only HDHU.9813G recommended products and methods to keep the radio, speakers, and other audio system components clean and in good condition. Do not use any abrasives, polishes, or rubbing compoundsto clean the screen or other components. Do not use any ammonia-based cleaners on the net. The use of other products or methods may cause damage to components. Screen : Do not use any chemical cleaners or chemical-containing wipes or cloths. These can cause damage to the screen surface. Gently clean the display glasssurface with a clean, dry microfiber cloth. Before cleaning, it is suggested to remove any visible dust, dirt, sand particles with a gentle compressed airstream. HDHU.9813G RESERVE Front SOUNDSTREAM Top Back 3
Accessories and Installation Harness Included! 23 Pin to Motorcycle Connector to Headunit 35 Pin to Motorcycle 35 Pin to Motorcycle D Installation Rubber Ring: User Manual Owner's Manual | EN OEM UPGRADE HEAD UNIT FOR 1998-2013 HARLEY DAVIDSON® ROAD GLIDEMOTORCYCLES IPx6 WATERPROOF FACEPLATE TECHNOLOGIES HDHU.9813RG Installation Screws (4pcs): External Microphone: 4
Installation Installation 1. Insert the Headunit into the dashboard. Headunit Motorcycle Dashboard 2. Use the 4pcs screws to fix the headunit. Screws 3. Connect the correct wiring and enjoying the headunit. 5
Headunit Control Panel Control. HDHU.9813RG R E S E R V E 1 4 2 5 3 6 1 Apple CarPlay® / Android Auto® 2 Press to enter CarPlay® / Android Auto® directly(When the iPhone/Android phone is connected). Siri Button（Voice Recognition） 3 When the iPhone/Android phone is connected, press Siri button to start the voice control function. Power / Mute • When the power is off, press to power on. • When the unit is working, short pressing for Mute, press again for unmute. • Pressing and hold to turn the source unit power off. 4 (Volume +) • Press to increase the volume value. 5 Home button • Press to toggle between Home screen and active media. • Available selections: Radio, SiriusXM, Apple CarPlay®/Android Auto®, BT Music, BT Phone, USB,Settings, Camera in. 6 (Volume -) • Press to decrease the volume value. 6
Headunit Control Handble Bar Control. HORN HI LIGHTS LO START OFF RUN UP MODE SEL DN AUDIO + − AUDIO + − UP MODE SEL DN + | • Press to increase the volume value. AUDIO | Mute Button • When the unit is working, short pressing for Mute, press again for unmute. Siri Button（Voice Recognition） • When the iPhone/Android phone is connected, Long press this button to start the voice control function. − | • Press to decrease the volume value. UP | ·[Radio] Press to select Next preset radio station for broadcasting. Press and hold to seek upward . ·[USB Music] Press repeatedly to shift track next for playback. Press and hold to active variousfast forward speeds for playback. [Bluetooth Music] Press repeatedly to shift track next for playback. MODE SEL | Mode Button • When the unit is working, press to select desired playback mode. Bluetooth Button(Bluetooth Connected) • When incoming call, short press to answer the call, long press to reject the call. • When talking call, long press to hangup. DN | ·[Radio] Press to select previous preset radio station for broadcasting. Press and hold to seek downward . ·[USB Music] Press repeatedly to shift track previous for playback. Press and hold to active various fast rewind speeds for playback. [Bluetooth Music] Press repeatedly to shift track previous for playback. 7
Wiring 1 USB Connector Connect the external USB cable for USB device, Android smart phone, iPhone. 2 Radio Connector Connect the Radio Antenna from motorcycle. 3 Camera in Connect the Camera in. 4 External Microphone Connector Connect the external Microphone cable. 5 Camera +12 V DC (Max 0.5A) Connect the Camera power cable. 6 SiriusXM Tuner Connector Connect the SXV300 tuner. Note: SiriusXM SXV300 Tuner sold separately, SiriusXM subscription required. 6 5 3 4 1 | 2 USB Connector (USB Storage /Apple CarPlay/Android Auto) Radio Antenna SXM Tuner(Not included) 3.5mm Connection for Included Bluetooth Calling Microphone Camera in Camera Control Wire (+12V Max0.5A) RCA Low-Level Subwoofer Channel Output For Optional Subwoofer Amplifier (RCA not incl.) RCA Low-Level Rear Channel Output for Optional Speaker Amplifier (RCA not incl.) RCA Low-Level Front Channel Output for Optional Speaker Amplifier (RCA not incl.) HDHU.9813RGWire Harness 8
Wiring 1 2 3 4 A B C D E F G H 32 Pin Connector Pin Definition: | D1,Green/Black( RL-) | D2,Red( ACC) A3,Blue( SWC R2) | | | A4, Blue( SWC C1) | B4, lue( SWC C0) | C4, Blue( SWC C2) | D4, Blue( SWC C4) E1,Green( RL+) | F1,Purple/Black( RR-) | G1, White/Black( FL-) | H1, Gray/Black( FR-) | F2,Purple( RR+) | G2, White( FL+) | H2, Gray( FR+) E3,Blue( REM) | | G3, Black(Ground) | H3, Yellow( B+) E4, Blue( SWC R0) | F4,Blue( SWC R1) | G4, Black(Ground) | H4, Yellow( B+) 9
Included Harness Harness Included! 23 Pin to Motorcycle Connector to Headunit Remote output from radio (Turns on aftermarket amplifiers) 35 Pin to Motorcycle 16 9 1 23 15 8 23 Pin Connector 24 13 1 23 35 12 35 Pin Connector P1, Gray/Black( FR-) P3, Blue( SWC R0) P4, Blue( SWC R1) P5, Blue( SWC R2) P6, Blue( SWC C4) P8, Blue( SWC C2) P10, Yellow( B+) P11, Black( Ground) P12, Red( ACC) P16,White( FL+) P17, White/Black( FL-) P18, Gray( FR+) P19, Black( Ground) P20, Yellow( B+) P22, Blue( SWC C1) P23, Blue( SWC C0) P1,20#, Purple( RR+) P2,20#, Green( RL+) P24,20#, Purple/Black( RR-) P25,20#, Green/Black( RL-) 10
Main Menu Settings HDHU.9813RG is a headunit for Motorcycle Touch the icon to enter the Setup menu. with the following functions: The Setup menu is included System Settings, Apple CarPlay®, Android Auto®, Radio, USB, BT Display Settings, Audio & EQ Settings, Bluetooth Music, Phone, Camera, SiriusXM ready . Settings. Touch the corresponding Mode icon to enter playing mode. The Mode icon in gray means the corresponding function is not ready, or the proper device has not been connected. 01-01-2022 | 12:02 AM Apple CarPlay | Android Auto | Radio | USB | SiriusXM | BT Music | Phone 01-01-2022 | 12:02 AM Apple CarPlay | Android Auto | Radio | USB | SiriusXM | BT Music | Phone Setting | 3:15 PM System Settings | > Display Settings | > Audio & EQ Settings | > Bluetooth Settings | > System Settings： The System Settings allow the user to set up the Language, Date & Time, Key Beep, Factory Reset and About System Settings | 3:14 PM Language | > Date & Time | > Key Beep | OFF Camera View | Normal Factory Reset | > About | > Language： Language | 3:14 PM English 中文 עברית Portugues España Hidden soft button bar: A hidden pop up soft button bar is located at the bottom. Touch the icon to shown the soft button bar. Touch the to hidden. Dimming, to change Daylight or Night. Setup, to enter the Settings Menu. Date & Time: To setting Time display format (12H or 24H), setting the date and time Date & Time | 00:01 Time Format | 12H 1 — 1 —2022 1 : 06 AM Bluetooth pairing. Camera in. EQ, to enter the Equalizer setting menu. 11
Settings Key Beep: On / Off To set the touch button beep tone is On or Off. Camera View : Normal / Reverse. To set the camera view is Normal or Reverse. Factory Setting: To default the default factory settings: Factory Reset Reset Factory Data Cancel | OK About: To display the HDHU.9813RG hardware and firmware version. About MCU: SOC: Hardware: Update Display setting: Below is the Display setting menu, user can select Nighttime Brightness,Touch Key Color,Background Wallpaper. Display Settings Nighttime Brightness | - | -8 | + Touch Key Color Background Wallpaper Nighttime Brightness : -15 – 0. (Default is -8). Touch Key Color Touch Key Color Auto Changing Color | ON Selectable Color | - | Red | + Auto Changing Colo : On/Off . ON: The Led color will change automatically. OFF: You press the button - or + to select desired color. Color: White / Red / Orange / Yellow /Blue / Green / Purple / Cyan. Background Wallpaper: User can select the preset wallpaper or select prefer picture in USB driver as the wallpaper. Background Wallpaper Press + to download a custom, JPG background wallpaper image from a USB flash drive, or select from the options below... Touch the corresponding picture to select the prefer background. Touch " + ", the head unit will search the USB photo file for wallpaper. Select a picture and touch "OK" to add the wallpaper. Select another picture for replacing the current wallpaper. 12
Settings Audio & EQ Setting Below shown is the Audio serring Menu. Audio & EQ Settings Balance & Fader > Digital Equalizer > F/R Crossover > Subwoofer Setup > Amp Turn-on Delay ON [toggle] Volume Settings > 12:01 AM About the Crossover This unit is equipped with an active crossover. The crossover limits the frequencies delivered to the outputs. The crossover adjusts the HPF (high pass filter) or LPF (low pass filter) of speakers and subwoofer, and also the slope (how fast the filter rolls off the highs or lows). Adjustments should be made according to the reproduction characteristics of the speakers. Depending on the speakers, a passive network may not be necessary. If you are unsure about this point, please consult your authorized Alpine dealer. Balance/Fader: Touch the + or – of Balance/Fade to tune for the driver and passenger preference. The value of Balance (Left 12 – Right 12) and Fader (Front 12 – Rear 12). Touch Reset to set both Balance and Fader to zero. • HPF (high pass filter): Cuts the lower frequencies and allows the higher frequencies to pass. • LPF (low pass filter): Cuts the higher frequencies and allows the lower frequencies to pass. • Slope: The level change (in dB) for a frequency change . • The higher the slope value, the steeper the slope becomes. • Do not use a tweeter without the HPF set on, with a high cut-off frequency, otherwise damage may occur to the speaker due to the low frequency content. • Adjustment should be made according to the recommended crossover frequency of the connected speakers. Determine the recommended crossover frequency of the speakers. Adjusting to a frequency range outside that recommended may cause damage to the speakers. For the recommended crossover frequencies of speakers, refer to the respective Owner’s Manual. We are not responsible for damage or malfunction of speakers caused by using the crossover outside the recommended value. Audio & EQ Settings Balance – 0 + Fader – 0 + Reset 12:00:03 AM 13-Band Equalizer: 13-band of EQ tuning, slide the EQ bar to tune each band frequency level according to use preference. Touch Reset button to sell all Band to zero. Digital Equalizer 0 0 0 0 0 0 0 0 0 0 50 80 125 200 315 500 800 1.25K 3.15K 5K 8K 12.5K off Reset 12:03 AM Or user can touch “<” or “>” at the bottom to select the following preset EQ: Off, Soft Rock,Pop,Electric,Jazz, EQ Custom. 13
Settings Front/ Rear Crossover: Slope： 12dB / 24dB User can touch "<" or ">" to select the desired frequency Value. Subwoofer Settings: Subwoofer Output: ON or OFF. Subwoofer Level: -10~+10 Subwoofer Crossovers: Set Low Pass Crossover Frequency & Slope. Slope： 12dB / 24dB Set High Pass Crossover Frequency & Slope. User can touch "<" or ">" to select the desired frequency Value. Subwoofer Phase: 00 or 1800 User can touch "<" or ">" to select the 00 or 1800 AMP Turn-on Delay: ON /OFF. User can set AMP Turn-on Delay is ON or OFF. Volume Settings: User can set Source Level / Maximum Volume. Source Level Adjust. Radio 0 USB 0 BT Audio 0 Apple CarPlay 0 Android Auto 0 SiriusXM 0 User can adjust the source mode (Radio, USB, BT Audio,Apple CarPlay, Andriod Auto, SiriusXM) gain value. The gain can be adjusted from -10~0 seperatedly. Maximum Volume Adjust. Maximum Volume Level : ON or OFF. Maximum Level Adjust: -40~+50 14
Settings
Bluetooth Settings：
Touch the Bluetooth Settings from the setting
menu will be shown below:
Bluetooth Settings
00:03
Connection | ON
Pairing | >
Device Name:
Clear Records | >
Connection : On/Off (Select Bluetooth connection
is On or Off).
Pairing: To start the paring.
Bluetooth Settings
00:03
Paring Mode
From Bluetooth device connection
Cancel
Device Name : Shown the connected phone or
device name.
Clear Records: To clear the device list records.
15Apple CarPlay® Apple CarPlay : You can operate iPhone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. Compatible iPhone models For details about compatibility of iPhone models, refer to the following website. https://www.apple.com/ios/carplay WARNING Certain uses of the iPhone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing. Notes on using Apple CarPlay • iPhone with iOS 7.1 or later is required. Update to the latest iOS version before use. • Apple CarPlay can be used on iPhone 5 or later. • For details on compatible models, refer to the compatibility list on the support site on the back cover. • For details about Apple CarPlay, refer to the manual supplied with your iPhone, or visit the website of Apple CarPlay. • Since the GPS on your iPhone is used, place your iPhone where it can easily receive a GPS signal • You can use Siri function by touching button once Apple CarPlay is activated • The Bluetooth connection with the Apple CarPlay compatible device will be terminated automatically if Apple CarPlay is turned on. • Hands-free phoning via Bluetooth wireless technology is not available while Apple CarPlay is on. Starting procedure of using Apple CarPlay 1 Connect an Apple CarPlay compatible device to this unit via USB. 2 Touch the Apple CarPlay icon. The Apple CarPlay home screen appears. You can use Apps of connected iPhone. The items displayed and the language used on the screen differ among the connected devices. To enter the Apple CarPlay mode, touch Apple Carplay icon on the Home selection screen. 1 2 3 1 Application keys Start the application. 2 Display the home screen of Apple CarPlay. Touch and hold to active Siri. 3 Home Exit the Apple CarPlay screen and displays Home screen. * The icon design may change depending on the iOS version. 16
Android Auto® Android Auto®: You can operate Android applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product Starting procedure of using Android Auto 1 Connect an Android Auto™ compatible device to this unit via USB. 2 Touch the Android Auto icon. The Android Auto home screen appears Note: • You can use Voice function by touching button once Android Auto is activated. • The Bluetooth connection with the Android Auto compatible device will be terminated automatically if Android Auto is turned on. • Hands-free phoning via Bluetooth wireless technology is not available while Android Auto is on. Notes on using Android Auto • Android phone with Android 5.0 or higher is required. Update to the latest OS version before use. • Your Android phone needs to support Android Auto. For details on compatible models, refer to the compatibility list on the support site on the back cover. • Download the Android Auto app on Google Play. • For details about Android Auto, refer to the manual supplied with your Android phone, or visit • Since the GPS on your Android phone is used, place your Android phone where it can easily receive a GPS signal. • Android Auto may not be available in your country or region.the website of Android Auto. 12:32 Google Maps | YT Music | Spotify | Phone SoundStream | Beyond Pod | Calendar | iHeartRadio 1 2 3 1 Application keys Start the application. 2 Home Exit the Android Auto screen and displays Home screen. 3 Operation Bar Starts the application or displays informa- tion. 17
Radio USB
Touch "Radio" in the main menu to enter the for more than 3 seconds, then the preset button
radio interface. will be highlighted on the screen, and the preset
station will be stored.
Radio setting:
Radio
DX
FM1 87.50 MHz
AM1
SXM
GOTO
87.50 90.00 98.00 106.00 108.00 87.50
Touch "FM" can change between
FM1>FM2>FM3.
Touch "AM" can change between Radio Area: Select the region , America/Europe
AM1>AM2. /Eastern Europe /Japan /Southeast Asia /Latin
Touch "GOTO" then Pop-up the
GOTO menu and enter the desired America/ Asia / Australia.
Frequency Number. RDS: Switch ON or OFF.
TA: Switch ON or OFF.
Radio
FM1 87.50
AM1 AF:Switch ON or OFF.
ENTER STATION NUMBER PTY: Enter PTY list.
1 2 3 4 5
6 7 8 9 0 Note: AF is only for Europe region.
87.50 90.00 98.00 106.00 108.00
Radio Area ON
RDS OFF
TA OFF
AF
PTY >
USB
Touch for Prescan search, each Plug the USB; the USB icon will be colorful.
scanned station will be played Touch the USB icon to enter the USB
for 10 sec, touch again to stop. playback mode. The source unit will
Touch to auto scan searching. playback the audio in the USB device.
Touch to enter EQ settings.
Touch to switch Local or DX.
Touch to enter Radio settings.
Short touch to seek down, long USB 1/20
touch to tune down. Holy Virgin
Short touch to seek up, long Groove Coverage
touch to tune up. Greatest Hits
00:18 / 03:10 1/20
Preset channel, six preset buttons store and recall
stations for each band. Touch and slide the preset Press to go to the following folder.
channel can switch to next band FM1/FM2/FM3
or AM1/AM2.
Press to search Audio/Image files.
Store a Station
1. Tune radio to desired station.
Press to go to the previous folder.
2.Touch and hold the one of the preset station
18USB Bluetooth Music Short press ti skip previous track. .Long press to fast reverse. Play or Pause button. Short press ti skip nexts track. Long press to fast forward. Press to select Repeat All> Repeat 1> Repeat Folder. Press to switch Randon is On or Off. Press to select Audio setting or set the preferred EQ of each band in custom mode. File List Browsing Touch to browse the folder and file list of the USB device. Track 01 Track 02 Track 03 Track 04 Track 05 Track 06 Track 07 Select Audio or Music files. Select Picture files. Return to playing previous file. Bluetooth Music: Touch the BT Music icon to enter Bluetooth Music playing mode. If the Bluetooth is connected, the music will be playing as below shown: Black Hole Sun Soundgarden Superunknown 00:16 / 04:38 Press to search Audio files. Short press ti skip previous track. Play or Pause button. Short press ti skip nexts track. Press to select Repeat All> Repeat 1> Repeat Folder. Press to switch Randon is On or Off. Press to select Audio setting or set the prefer EQ of each band in custom mode. Bluetooth Connect: If the Bluetooth is not connected, press Reconnect the paired Phone or paring to pair the new device. Bluetooth device is not connected Connection ON Reconnect Pairing Bluetooth Pairing: Pairing screen will be shown as below: Pairing Connect from Bluetooth device. Cancel Turn on the Bluetooth of the Mobile phone/ Bluetooth device; you can see the "SOUNDSTREAM HD." Select the "SOUNDSTREAM HD" for paring and connection. 19
Bluetooth Phone Bluetooth Phone: After the mobile Phone is connected with the source unit via Bluetooth(HFP), the user can go through the source unit. Make a phone call. Touch the Phone icon in Main Menu to go to BT Phone mode. Please note it needs to connect the microphone for phone calls. SOUNDSTREAM HD 00:19 Keypad. Tap it to enter call mode. History. Tap it to show the call record, missed, received and dialed calls. Contact. Tap it to show the phonebook of connected device. BT Setup. Tap it to set Auto answer and Microphone gain. Make a call or Accept the incoming call. Backspace, tap it to clear the incorrect dial digit. Make a Call: 1. Touch the icon to enter dial screen. 2. Using the keypad , touch 0-9,*,# , enter the desired number to dial. If you input an incorrect number, touch the icon on the keypad to delete the incorrect number. 3. Once hte correct bumber appears on the screen, touch the icon to go to daling interface. 4 To end the call, touch the icon on the screen. SOUNDSTREAM HD 12:03 AM Phone iPhone Active Call 10086 0:14 Receive an incoming call: If the Phone is connected with the source unit via Bluetooth, when an incoming call, below screen will be shown: Press to answer the incoming call. Press to reject the incoming call. SOUNDSTREAM HD 12:03 AM Phone iPhone Active Call 10086 0:14 SOUNDSTREAM HD 12:02 AM Phone iPhone Keyboard Interchange between phone and source unit. ON / OFF the Microphone function. Display the Keypad. 20
Bluetooth Phone SiriusXM Operation
Call List:
Touch the icon to display the
call combined list.
SOUNDSTREAM HD
Phone
Keyboard
History
Contacts
Setup
iPhone
History
10000
10000
10000
10000
10000
Slide the bar at the right up and down to
display a call logs.
Contacts:
Touch the icon to access the phone
book of the connected mobile Phone.
To make a call from the phonebook,simply
touch the contact's name
SOUNDSTREAM HD
Phone
Keyboard
History
Contacts
Setup
iPhone
Contacts
Ray
Darcy Chu
Maxiery Chang
Andy Qiu
Chang Chang
Rex Liang
BT Setup:
Phone
Loading...
Keyboard
History
Contacts
Setup
iPhone
Setup
Auto Answer OFF
Mic Gain – Middle +
Auto Answer On/Off, incoming call auto
answer.
MIC Gain: Low /Middle /High
SiriusXM Ready
SiriusXM is where moments happen. The widest,
deepest variety of music, ad-free. More games,
more sports, more coverage than anywhere. The
most extensive entertainment, complete news
coverage and every kind of comedy. Listen in your
car, on your phone, online and at home. A SiriusXM
Vehicle Tuner and subscription are required. For
more information, visit www.siriusxm.com.
Activating your SiriusXM Subscription after
installing your SiriusXM Connect Vehicle Tuner and
antenna, power on your Headunit and select
SiriusXM mode. You should be able to hear the
SiriusXM preview channel on Channel 1. If you
cannot hear the preview channel, please check the
installation instructions to make sure your SiriusXM
Connect tuner is properly installed.
After you can hear the preview channel, tune to
Channel 0 to find the Radio ID of your tuner. In
addition, the Radio ID is located on the bottom of the
SiriusXM Connect Vehicle Tuner and its packaging.
You will need this number to activate your subscrip-
tion. Write the number down for reference.
Note: the SiriusXM Radio ID does not include the
letters I, O, S or F.
In the USA, you can activate online or by calling
SiriusXM Listener care:
• Visit www.siriusxm.com/activatenow
• Call SiriusXM Listener Care at
1-866-635-2349
For Canadian Subscriptions, please contact:
• Visit www.siriusxm.ca/activate
• Call SiriusXM Customer Care at
1-888-539-7474
As part of the activation process, the SiriusXM
satellites will send an activation message to your
tuner. When your radio detects that the tuner has
received the activation message, your radio will
display "Subscription Updated".
Once subscribed, you can tune to channels in your
subscription plan. Note, the activation process
usually takes 10 to 15 minutes, but may take up to an
hour. Your radio will need to be powered on and
receiving the SiriusXM signal to receive the activation
message.
21SiriusXM Ready To enter SiriusXM mode, touch the SXM icon on the Main Menu: 01-01-2022 | 12:02 AM Apple CarPlay | Android Auto | Radio | SiriusXM | BT Music | Phone SXM If the CHECK TUNER message appears, verify all connections are complete. Confirm the Vehicle Connect Tuner is connected, as well as the antenna for the Vehicle Connect Tuner. SiriusXM | 02:48 FM1 | AM2 | SXM1 | ALRT Check Tuner When successfully connected, the user interface will appear: SiriusXM | 01:27 FM1 | AM2 | SXM1 | ALRT Ch.1 XM Preview PREVIEW 800-643-2112 siriusxm.com SiriusXm1 Entertainment PREVIEW | PREVIEW | PREVIEW | PREVIEW | PREVIEW SiriusXM Channel Logos are displayed in the user interface, providing a graphical representation of the current channel tuned.Album art can be displayed for most of the SiriusXM music channels. When album art is not available, the channel logo or the SiriusXM logo will be displayed. Note: Compatible with SXV200 or later tuner models. Not all music channels contain album art images. User Interface Operation FM1 Press FM or AM keys to toggle between SXM & FM/AM radio mode AM2 SXM1 Press the SXM key to toggle between three preset groups ALRT Press the ALRT key to view current song and/or artist alerts Press the Channel Browse key to scroll channel listings by category Press the Direct Tune key to enter a specific channel number to tune Press the EQ key to open the 10-band equalizer settings Press the Settings icon to access settings specific for SiriusXM mode Press the Next or previous channel keys to advance channels Press any preset key to tune the stored channel. To store a preset, tune to the desired channel, then press & hold on the preset location for 3 seconds. PREVIEW PREVIEW Artist & Song Alerts ALRT While listening to SiriusXM Satellite Radio, you can mark Artists and/or Songs for which you wish to be alerted. The radio will display an Alert message whena matching artist or song is found on another channel. Then you can choose if you want to tune to that favorite or you can ignore the alert and stay on your current channel. To save an artist or song title, press on the artist name or song title on the screen. Then, confirm again to save the favorite. SiriusXM | 12:02 FM1 | AM2 | SXM1 | ALRT Save Artist Alert? or Save Song Alert? Artist | Song | Cancel PREVIEW | PREVIEW | PREVIEW | PREVIEW | PREVIEW 22
SiriusXM Operation SiriusXM 1 [Artist Alert] 10,000 Maniacs Ch 22: Ch0022Sid362Cat01 2 [Artist Alert] Pearl Jam Ch 21: Ch0021Sid363Cat01 Channel Browse Press the Browse key to scroll channel listings by category or all available channels. Channel List Press Ch. List to view all available channels in numeric sequence. Scroll the list to the desired channel, then select within the channel row to tune the channel. SiriusXM Ch List | 0 Cat List | 1 | 2 Weekend Countdown #44 | 4 My Music | 5 Channel Locked Category List Press Cat. List to view all available channels in category sequence. SiriusXM All Channels Ch List | 0 RADIO ID | 1 XM Preview Cat List | 2 Hits 1 | 3 20 on 20 | 4 40s on 4 My Music | 5 50s on 5 Select a category by pressing the left or right arrows above the channel list. Scroll the corresponding category's channels below, press a channel name to tune the channel. Info At any time, press the content key on the right side to view the artist, title, & other information about the song/content currently playing on the channel(s) listed. My Music Press the MyMusic key to view all stored artist & song title alerts. Press the red X at right of any undesired alerts to delete it. Temporarily disable any alert by deselecting the check box left of any alert. Disable all alerts by sliding the switch on top to off. SiriusXM My Music Alerts | ON Somebody (85) Direct Tuning a Channel Press the Direct Tune key to enter a channelnumber to tune. Enter the channel number using the keypad pop-up, then select the green check box to confirm your selection. If a number is entered in error, press the red backspace keyto erase the last digit. SiriusXM Ch 1 XM Preview Enter Channel Number 9 1 | 2 | 3 | 4 | 5 6 | 7 | 8 | 9 | 0 23
SiriusXM Operation 13-Band Equalizer Press the 13-Band Equalizer key to access the audio equalizer settings. Return to the Audio & EQ Settings section of this owners manual (pg. 13) for more information. Digital Equalizer | 12:03 AM 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 50 | 80 | 125 | 315 | 500 | 1.25K | 2.15K | 3.15K | 5K | 8K | 12.5K off Reset SiriusXM Settings Menu Press the settings icon to enter the SiriusXM settings menu. SiriusXM | 01:30 Parental Lock | OFF Change Passcode Lock Channel Version Parental Controls The Parental Lock feature can be used to block user selected channels from playback. To enable the parental lock, slide the virtual switch to ON. The switch should illuminate orange. A passcode pop-up will appear, requesting the parental lock passcode. Enter the 4-digit passcode, then select the green check box to confirm. If a number is entered by mistake, press the red backspace key to erase the last digit. The default passcode is 0000. SiriusXM | 02:28 Please Enter Passcode 1 | 2 | 3 | 4 | 5 6 | 7 | 8 | 9 | 0 Then, the channel list will appear to scroll the subscribed channels. Select any channel(s) to lcok. When a channel is successfully locked, a lock icon will appear adjacent to the channel name. SiriusXM | 02:21 Ch List 0 RADIO ID 1 XM Preview 2 Hits 1 3 20 on 20 4 40s on 4 5 50s on 5 Change Passcode Select Change Passcode to change the passcode required to activate the parental lock feature and to lock & unlock channels. A passcode pop-up will appear, requesting the current passcode. Enter the 4-digit passcode, then select the green check box to confirm. If a number is entered by mistake, press the red backspace key to erase the last digit. The default passcode is 0000. SiriusXM | 02:28 Please Enter Passcode 1 | 2 | 3 | 4 | 5 6 | 7 | 8 | 9 | 0 24
SiriusXM Operation Then, another passcode pop-up will appear, requesting the new passcode. Enter the 4-digit passcode, then select the green check box to confirm. If a number is entered by mistake, press the red backspace key to erase the last digit. SiriusXM 02:20 Please Enter NEW Passcode 1 | 2 | 3 | 4 | 5 6 | 7 | 8 | 9 | 0 Then, a third & final passcode pop-up will appear, requesting to enter the new passcode again to the green check box to confirm. If a number is entered by mistake, press the red backspace key to erase the last digit. SiriusXM 02:21 Please Enter CONFIRM Passcode 1 | 2 | 3 | 4 | 5 6 | 7 | 8 | 9 | 0 Lock Channel Select Lock Channel to lock or unlock channels from playback. A passcode pop-up will appear, requesting the current passcode. Enter the 4-digit passcode, then select the green check box to confirm. If a number is entered by mistake, press the red backspace key to erase the last digit. The default passcode is 0000. SiriusXM 02:28 Please Enter Passcode 1 | 2 | 3 | 4 | 5 6 | 7 | 8 | 9 | 0 Then, the channel list will appear to scroll the subscribed channels. Select any channel(s) to lock or unlock. If a channel is successfully locked, a lock icon will appear adjacent to the channel name. SiriusXM 02:21 Ch List 0 RADIO ID 1 XM Preview 2 Hits 1 3 20 on 20 4 40s on 4 5 50s on 5 25
SiriusXM trouble shooting Advisory Message | Cause | Explanation / Solution Check Antenna | The radio has detected a fault with theSiriusXM antenna. The antenna cable maybe either disconnected or damaged. | -Verify that the antenna cable is connected to the SiriusXM Connect Vehicle Tuner. -Inspect the antenna cable for damage and kinks. Replace the antenna if the cable is damaged. -SiriusXM products are available at your local car audio retailer or online at: shop.siriusxm.com/all-parts/ Check Tuner | The radio has difficulty communicatingwith the SiriusXM Connect Vehicle Tuner. The tuner may be disconnected or damaged. | Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the radio No Signal | The SiriusXM Connect Vehicle Tuner hasdifficulty receiving the SiriusXM satellite signal. | -Verify that your vehicle is outdoors with a clear view of the sky. -Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on the outside of the vehicle. -Move the SiriusXM antenna away from any obstructions.Inspect the antenna cable for damage and kinks. -Consult the SiriusXM Connect Vehicle tuner installation manual for more information on antenna installation. Replace the antenna if the cable is damaged. SiriusXM products are available at your local car audio retailer or online at shop.siriusxm.com/all-parts/ Subscription Updated | The radio has detected a change in your SiriusXM subscription status. | -Press OK to clear the message. -In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if you have questions about your subscription. -In Canada, visit www.siriusxm.ca/activate or call CustomerCare at 1-888-539-7474 if you have questions about yoursubscription. shop.siriusxm.com/all-parts/ Channel Unavailable | The channel that you have requested is nota valid SiriusXM channel or the channelthat you were listening to is no longeravailable. You may also see this messagebriefly when first connecting a newSiriusXM Connect Vehicle tuner. | Visit www.siriusxm.com for more information about the SiriusXM channel lineup. Channel Unsubscribed | The channel that you have requested is not included in your SiriusXM subscription package or the channel that you were listening to is no longer included in your SiriusXM subscription package. | -In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if you have questions about your subscription. -In Canada, visit www.siriusxm.ca/activate or call CustomerCare at 1-888-539-7474 if you have questions about yoursubscription. shop.siriusxm.com/all-parts/ Channel Locked | The channel that you have requested is Locked by the radios Parental Control feature. | See the Parental Control section for more information on the Parental Control feature and how to access locked channels. 26
Camera in Camera View For connecting a camera. Displaying the picture from the Camera The camera view screen is displayed when you enter the Camra in. Camera in | 01:55 27
Specification GENERAL Power Requirement: | DC 10 - 16Volts, Power Requirement: | Negative ground Current Drain: | 15A (Max.) Maximum Power Output: | 50Watts x 4 RMS Power Output: | 25Watts x 4 Speaker Impedance: | 2- or 4-Ohm Load Frequency Response: | 20Hz ~20KHz Operating temperature: | -20~60 ℃ Dimensions: | 230mm(W) x 210mm(D)x 140mm(H) TFT Display TFT Screen size: | 7 – Inch TFT/LCD Resolution | 1024x600 pixels FM RADIO SECTION Frequency Range | 87.5 – 107.9 MHz (America) | 87.5 – 108 MHz (Europe) Usabe Sensitivity (S/N=30dB) | ≤15dB S/N Ratio: | ≥55dB Stereo Seperation | ≥30dB AM RADIO SECTION Frequency Range | (America) 530 – 1710 KHz | (Europe) 522 – 1620 KHz Usabe Sensitivity (S/N=20dB) | ≤40dB S/N Ratio: | ≥45dB Line-out / Subwoofer Output Maximum Output Leve (10K ohms load): | ≥4 V RMS Subwoofer Time Align | 0~18ms 28
``` Trouble Shooting Problem | Cause | Correct action No Power, Dead. | Check fuse | Replace fuse No Power, Dead. | Incorrect wiring | Consult your Local Specialist. www.MotorcycleAudio.com/Specialist-Locator No sound output when operating the unit with amplifiers or power antenna attached. | Power antenna lead is shorted to ground excessive current is required or remote on the amplifiers or power antenna | 1. Turn off the unit. 2. Remove all wires attached to the power antenna lead. Check eachwire for a possible short to the ground using an ohm meter. 3. Turn on the unit. 4. Reconnect each amplifier remotewire to the power antenna lead one by one. If the amplifiers turn off before all wires are attached, use an external replay to provide remote-on voltage (excessive current required) Poor performance of radiostation | Weak signal | Move the Motorcycle to another place, then tryagain No Sound or Audio | Volume is in minimum. | Adjust volume to the desired level. No Sound or Audio | The wiring is not properly connected | Check wiring connection. ``` 29
FCC Notes FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the follow- ing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equip- ment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. www.MotorcycleAudio.com Follow Us on Social Media 30