Model HDHU.14+
Also listed as: HDHU.14
Owner’s manual and specifications for the HDHU.14+ head unit.
| Power Requirement | DC 10 - 16Volts, Negative ground |
|---|---|
| Current Drain | 15A (Max.) |
| Maximum Power Output | 50Watts x 4 |
| RMS Power Output | 25Watts x 4 |
| Speaker Impedance | 2- or 4-Ohm Load |
| Frequency Response | 20Hz ~20KHz |
| Operating temperature | -20~60 ℃ |
| Dimensions | 230mm(W) x 210mm(D)x 140mm(H) |
| TFT Screen size | 7 – Inch TFT/LCD |
| Resolution | 1024x600 pixels |
| Line-out / Subwoofer Output | ≥4 V RMS |
Source: Owner’s Manual, Soundstream. Wording and values are retained from the supplier document.
The complete text of the Owner’s Manual for HDHU.14+ / HDHU.14 (19 pages), extracted from the supplier PDF; pages without a text layer were transcribed from the page image. Check wiring and settings against the original PDF before cutting or splicing.
RESERVE Owner's Manual EN OEM UPGRADE HEAD UNIT FOR 2014+ HARLEY DAVIDSON® MOTORCYCLES HDHU.14+ RESERVE 7:39 .ıll LTE Holl St Artesia Blvd Bellis Park Granbury St 11th St Melrose St 39 Home Work Body Like A Back R... Sam Hunt Works with Apple CarPlay androidauto SOUNDSTREAM TECHNOLOGIES Bluetooth X300 WATT 4CH. AMPLIFIER HDHU.14+
Contents Safety First Safety Definitions | 2 Pre-Riding Checklist | 3 Care and cleaning | 3 Screen | 3 Appearance | 3 Accessories & Installation | 4 Installation | 5 Panel Description | 6 Wiring | 7 Harness | 8 Operation Main menu | 9 Setting | 9 Apple CarPlay®/Android Auto® | 12 Radio operation | 13 USB operation | 13 Bluetooth Music | 14 Bluetooth Phone | 15 Specification | 17 Troubleshooting | 18 FCC Notes | 19 Safety First Safety Definitions Statements in this manual preceded by the following words are of particular significance: WARNING WARNING indicates a potentially hazardous situation that could result in death or severe injury if not avoided. WARNING Set volume levels and other controls on audio and electronic devices before riding. Distractions can lead to loss of control, resulting in death or serious injury. WARNING Do not select a volume level that blocks out traffic noise or interrupts the concentration necessary for the safe operation of the Motorcycle. Distractions or a volume level that blocks our traffic noise could cause loss of control resulting in death or severe injury. Note Pay attention while riding, keeping your eyes and clear mind on the road. Some features are locked out to prevent distraction, limited in capability while the Motorcycle is in motion. Even a part is available, donot allow it to distract you from operating your Motorcycle safely. For safety, program the system when stopped. Perform system setup and get familiar with the controls and features of the infotainment system before operating the Motorcycle on the road. This system cannot warn about the safety ofan area, bad road conditions, and availability of emergency services. Use this radio only in locations where it is safe to do. 2
Before You Ride…. Appearance
Checklist
Configure the system with your personal
preferences before riding to use features and
minimize distractions while on the road
entirely.
1. Set brightness, background.
2. Configure presets.
3. Adjust audio settings like EQ, volume, fade,
balance etc. before ridding.
4. Pair, connect and set up phone features
through Bluetooth.
5. Connect USB devices for Apple CarPlay® or
Android Auto®.
6. Select station or media.
CARE AND CLEANING
Use only HDHU.14+ recommended
products and methods to keep the radio,
speakers, and other audio system
components clean and in good condition.
Do not use any abrasives, polishes, or
rubbing compounds to clean the screen
or other components. Do not use any
ammonia-based cleaners on the net.
The use of other products or methods
may cause damage to components.
Screen:
Do not use any chemical cleaners or
chemical-containing wipes or cloths.
These can cause damage to the screen
surface.
Gently clean the display glass surface with
a clean, dry microfiber cloth. Before
cleaning, it is suggested to remove any
visible dust, dirt, sand particles with a
gentle compressed air stream.
RESERVE
Front
Top
Back
3Accessories and Installation Harness Included Installation Use OEM head unit mounting locations & original screws 4
Installation Note: Reinstall the OEM bracket after head unit installation Installation 1 USB Fakra Connector Connect the OEM USB cable to the USB connector for playback Android smartphone, iPhone 2 AM/FM Radio Connector Connect the Radio Antenna from HD Motorcycle. 3 External Microphone Connector Connect the External Microphone. (Used for Voice Command Function) 1 2 3 5
Panel Description R E S E R V E 1 2 3 4 5 6 1 Apple CarPlay® / Android Auto® Press to enter CarPlay® / Android Auto® directly(When the iPhone/Android phone is connected). 2 SIRI Button Voice Recognition Press to enter CarPlay® / Android Auto® directly (When the iPhone/Android phone is connected). 3 Power / Mute • When the power is off, press to power on. • When the unit is working, short pressing for Mute, press again for unmute. • Pressing and hold to turn the source unit power off. 4 Home button • Press to toggle between the home screen andactive media. • Available selections: Radio, Apple CarPlay® / Android Auto®, BT Music, BT Phone, USB, Settings. 5 (Volume +) • Press to increase the volume value. 6 ( Volume -) • Press to decrease the volume value. 6
Wiring 3.5mm Connection for Included Bluetooth Calling Microphone RCA Low-Level Subwoofer Channel Output For Optional Subwoofer Amplifier (RCA not incl.) HDHU.14 Wire Harness RCA Low-Level Rear Channel Output for Optional Speaker Amplifier (RCA not incl.) RCA Low-Level Front Channel Output for Optional Speaker Amplifier (RCA not incl.) OEM USB Cable Connector (USB cable Not Included) OEM Radio Antenna Connector (Antenna cable Not Included) 7
Included Harness Harness : Connect to Motorcycle: Connect to HDHU.14+ (Headunit): D Connect to External Amplifier: Connect to Handlebar Control Module: Note: The Handlebar Control Module is Not Included 8
Main Menu Settings
HDHU.14+ is a headunit for Motorcycle with
the following functions: Touch the icon to enter the Setup menu.
The Setup menu is included System Settings, Display
® ®
Apple CarPlay , Android Auto , Radio, USB, Settings, Audio & EQ Settings, Bluetooth Settings.
BTMusic, Phone.
Touch the corresponding Mode icon to
enter playing mode. The Mode icon in
gray means the corresponding function is
not ready, or theproper device has not
been connected.
01-01-2021 12:00 AM
Apple
CarPlay | Android
Auto | Radio | USB | BT Music
Phone
01-01-2021 12:00 AM
Apple
CarPlay | Android
Auto | Radio | USB | BT Music
Phone
System Settings :
The System Settings allow the user to set up
the Language, Date & Time, Key Beep, Factory
Reset, and About
Setting 3:14 PM
Language | >
Date & Time | >
Key Beep | ON
Factory Reset | >
About | >
Hidden soft button bar:
A hidden pop-up soft button bar is located
at the bottom. Touch the icon to show
the soft button bar. Touch the to hidden.
Language :
Setting 3:14 PM
English
中文
עברית
Portuguese
España
1ns
Dimming, to change Daylight or
Night (If illumination detect is OFF in
Display Setting)
Setup to enter the Settings Menu. Date & Time:
To setting Time display format (12H or 24H),
setting the date and time
Bluetooth pairing.
EQ, to enter the Equalizer setting
menu.
Setting 00:01
Time Format 12H
1 - 1 -2022 1 : 08 AM
9Settings Beep Tone: On / Off To set the touch button beep tone is On or Off. Factory Setting: To default the default factory settings: Reset Factory Data Cancel | OK About: To display the HDHU.14+ hardware and firmware version. MCU: SOC: Hardware: Update Display setting: Below is the Display setting menu; users canselect Lighting Detect, Daylight Dimming Level, Night Dimming Level, Illumination, and Wallpaper. Lighting Detect | ON Daylight Dimming Level | - | 12 | + Night Dimming Level | - | 8 | + Illumination | > Wallpaper | > Lighting Detect: On/Off Daylight Dimming Level: 8 – 15 Night Dimming Level: 0 – 8 Illumination Led Auto | OFF Led Color | Red Led Auto: On/Off. ON: The Led color will change automatically. OFF: You press the button - or + select desired color. Color: White / Red / Yellow /Blue / Green / Purple / Light Green Wallpaper: Users can select the preset wallpaper or selectpreferred pictures in the USB driver as the wallpaper. Touch the corresponding picture to select the preferred background. Touch "+, "the head unit will search the USB photo file for wallpaper. Select a picture and touch OK to add the wallpaper. Select another picture for replacing the current wallpaper. 10
Settings
Audio & EQ Setting
Below shown is the Audio settings menu.
Setting
🔄 | ⚙ | .ıl 🔋 ✳ 00:02
Balance/Fader | >
Subwoofer Output | ON
Subwoofer Filter | – 160Hz +
Subwoofer Level | – 0 +
EQ | >
LOUD | OFF
Balance/Fader:
Touch the + or – of Balance/Fade to tune for
the driver and passenger preference.
The value of Balance (Left 12 – Right 12) and
Fade (Front 12 – Rear 12)
Touch Reset to set both Balance and Fade
to zero
Setting
🔄 | ✳ 00:03
Balance
– 0 +
Fader
– 0 +
Reset
Subwoofer Output: On/Off
Subwoofer Filter: 50Hz, 80Hz,120Hz,160Hz
Subwoofer Level: -10 ~ +10
10- Band Equalizer:
10 - band of EQ tuning, slide the EQ bar to
tune each band frequency level according to
user preference.
Touch Reset button to sell all Band to zero.
🔄 | EQ | ✳ 12:03 AM
-1 | +3 | +3 | 2 | 0 | -1 | -1 | 0 | +2 | +1
32 | 63 | 125 | 250 | 500 | 1k | 2k | 4k | 8k | 16k
< | Pop | > | Reset
Or user can touch "<" or ">" at the bottom to
select the following preset EQ:
Off, Soft Rock, Pop, Electric, Jazz, EQ Custom.
Bluetooth Settings :
Touch the Bluetooth Settings from the setting
menu will be shown below:
Setting
🔄 | ✳ 00:03
Connection | ON
Pairing | >
Device Name: | >
Clear Records | >
Connection: On/Off (Select Bluetooth connectionis
On or Off).
Pairing: To start the paring.
Setting
✳ 00:03
Pairing Mode
From Bluetooth device connection
⟳
Cancel
Device Name: Shown the connected Phone or
device name.
Clear Records: To clear the device list records.
11Apple CarPlay® & Android Auto® Apple CarPlay® : Plug the iPhone (iPhone 5 or later models, and IOS 7.1 or above) through the lightning cable to the USB port of the source unit. The iPhone will be shown the "CarPlay." The source unit will enter the CarPlay interface, the APP that supports the CarPlay feature will be displayed on the source unit. Touch the corresponding APP can operate. Siri: In CarPlay® mode, the user can talk to SIRI to Control the CarPlay® functions. Press to start the SIRI function, touch the button for 2 seconds or the iPhone's HOME button. Now you can talk to Siri about playing music; I am going... Note: For the SIRI function in the source unit, the The microphone must be connected. In CarPlay® mode, touch the" Home" button or Icon to go back to the main Menu of the sourceunit. Android Auto® : Android Auto® enables you to use functions of your Android device convenient for driving. You can easily access route guidance, make calls, listen to music, etc. For details about Android Auto® , visit https://www.android.com/auto or https://support.google.com/androidauto Compatible Android devices You can use Android Auto with Android devices of Android version 5.0 or later. Note: Android Auto may not be available on all devices and is unavailable in all countries or regions. Operation: 1.Connect an Android device via a USB terminal. To use the hands-free function, connect the Android device via Bluetooth. When an Android device compatible with Android Auto is connected to a USB terminal, the device is connected via Bluetooth automatically, and the Bluetooth smartphone currently connected is disconnected. 2. Unlock your Android device 3. To enter Android Auto mode, touch the Android Auto icon on the head unit screen. You can perform the operations of the Apps of the connected Android device. 4. In the Android Auto model, touch "Home" to the head unit main menu. 12
Radio USB
Touch "Radio" in the main Menu to enter the Radio setting:
radio interface.
00:01
PS
FM1
87.50 MHz
AM1
87.50 90.00 98.00 106.00 108.00 87.50
Radio Area 00:02
RDS ON
TA OFF
AF OFF
PTY >
FM1 Touch "FM" can change between
FM1>FM2>FM3.
AM1 Touch "AM" can change between
AM1>AM2.
PS Touch for pre-scan search; each
scan station will be played for
3sec, and touch again to stop.
Touch to auto-scan searching.
Touch to enter EQ settings.
Touch to switch Local or DX.
Touch to enter Radio settings.
Short touch to seek down, long
touch to tune down.
Short touch to seek up, long
touch to tune-up.
Preset channel, six preset buttons store, and recall
stations for each band. Touch and slide the preset
channel can switch to the next band,
FM1/FM2/FM3 or AM1/AM2.
Store a Station
1. Tune the radio to the desired station.
2.Touch and hold one of the preset stations for
more than 3 seconds, then the preset buttonwill
be highlighted on the screen, and the preset
station will be stored.
Radio Area: Select the region, American/Europe
/Eastern Europe /Japan /Southeast Asia /Latin
American/ Asia / Australia.
RDS: Switch ON or OFF.
TA: Switch ON or OFF. AF:
Switch ON or OFF. PTY:
Switch ON or OFF.
Note: AF is only for the European region.
USB
Plug the USB; the USB icon will be colorful.
Touch the USB icon to enter the USB playback
mode. The source unit will playback the audio
in the USB device.
00:02
USB 1/20
Holy Virgin
Groove Coverage
Greatest Hits
00:18 / 03:10 1/20
Press to go to the following folder.
Press to search Audio files. Press
to go to the previous folder.
13```
USB Bluetooth
[icon] Short press to skip previous [icon] Press to search Audio files.
track.Long press to fast reverse.
[icon] Play or Pour button. [icon] Short press to skip previous track.
Long press to fast reverse.
[icon] Short press to skip the next [icon] Play or Pause button.
track.Long press to fast
forward. [icon] Short press to skip the next
track.Long press to fast
[icon] Press to select Repeat All> forward. Press to select
Repeat 1> Repeat Folder. Repeat All> Repeat 1>
Repeat Folder.
[icon] Press to switch Random
is On or Off. [icon] Press to switch Random is
On or Off.
[icon] Press to select Audio setting or
set the preferred EQ of each [icon] Press to select Audio setting or
bandin custom mode. set the preferred EQ of each
bandin custom mode.
File List Browsing Bluetooth Connect:
Touch [icon] to browse the folder and If the Bluetooth is not connected, press Reconnect
file list of the USB device. the paired Phone or paring to pair the new
device.
[screenshot image area] [screenshot image area]
USB 1/20 00:02 [icon] Bluetooth device is not connected
[icon] Track 01 Connection ON [toggle]
Track 02 Reconnect
[icon] Track 03 Pairing
Track 04
Track 05
Track 06
Track 07
Bluetooth Music: Bluetooth Pairing:
Touch the BT Music icon to enter Bluetooth The pairing screen will be shown as below:
Music playing mode. If the Bluetooth is
connected, the music will be playing as
below shown:
[screenshot image area] [screenshot image area]
BT Music 00:06 BT Music 00:06
[icon] Black Hole Sun [icon] Pairing
[icon] Soundgarden [icon] Connect from Bluetooth device.
Superunknown [icon]
[spinner icon]
00:16 / 04:38
[icon] [icon] [icon] Cancel
Turn on the Bluetooth of the Mobile phone/ Bluetooth
device; you can see the "SOUNDSTREAM HD."
Select the "SOUNDSTREAM HD" for paring and
connection.
14
```Bluetooth Phone Bluetooth Phone: After the mobile Phone is connected with the source unit via Bluetooth(HFP), the user can go through the source unit Make a phone call. Touch the Phone icon in Main Menu to go to BT Phone mode. Please note it needs to connect the microphone for phone calls. Phone | SOUNDSTREAM HD | 00:19 iPhone Keyboard 1 | 2 | 3 4 | 5 | 6 7 | 8 | 9 * | 0/+ | # Keyboard History Contacts Setup Phone | SOUNDSTREAM HD | 12:03 AM iPhone Active Call 10086 0:14 Keyboard History Contacts Setup Receive an incoming call: If the Phone is connected with the source unit via Bluetooth, when an incoming call, the below screen will be shown: Press to answer the incoming call. Press to reject the incoming call. Keypad. Tap it to enter call mode. History. Tap it to show the call record, missed, received, and dialed calls. Contact. Tap it to show the phonebook of connected device. BT Setup. Tap it to set Auto answer and Microphone gain. Make a call or accept the incoming call. Backspace, tap it to clear the incorrect dial digit. Phone | SOUNDSTREAM | 12:03 AM iPhone Active Call 10086 0:14 Keyboard History Contacts Setup Phone | SOUNDSTREAM | 12:02 AM iPhone Keyboard 1 | 2 | 3 4 | 5 | 6 7 | 8 | 9 * | 0/+ | # Keyboard History Contacts Setup Make a Call: 1. Touch the icon to enter the dial screen. 2. Touch 0-9, *, #, #, use the keypad, and enter the desired number to dial. If you input an incorrectnumber, touch the icon on the keypad to delete the wrong number. 3. Once the correct number appears on the screen, touch the icon to go to the dialing interface. 4 To end the call, touch the icon on the screen. The interchange between phone and source unit. Toggle On / Off the Microphone function. Display the Keypad. 15
Bluetooth Phone Call List: Touch the icon to display the call combined list. Phone | SOUNDSTREAM HD | 00:20 iPhone History 10000 10000 10000 10000 10000 Slide the bar at the right up and down to display call logs. Contacts: Touch the icon to access the phone book of the connected mobile Phone. To make a call from the phonebook, simply touch the contact's name. Phone | SOUNDSTREAM HD | 00:20 iPhone Contacts Ray Darcy Chu Maxerry Chang Andy Qiu Chang Chang Rex Liang BT Setup: Phone | Loading... | 00:20 iPhone Setup Auto Answer | OFF Mic Gain | Middle Auto Answer: On/Off, incoming call auto answer. MIC Gain: Low /Middle /High 16
HDHU.14+ Specifications GENERAL Power Requirement: | DC 10 - 16Volts, Power Requirement: | Negative ground Current Drain: | 15A (Max.) Maximum Power Output: | 50Watts x 4 RMS Power Output: | 25Watts x 4 Speaker Impedance: | 2- or 4-Ohm Load Frequency Response | 20Hz ~20KHz Operating temperature: | -20~60 ℃ Dimensions: | 230mm(W) x 210mm(D)x 140mm(H) TFT Display TFT Screen size: | 7 – Inch TFT/LCD Resolution | 1024 x 600 pixels FM RADIO SECTION Frequency Range | 87.5 – 107.9 MHz (America) | 87.5 – 108 MHz (Europe) Usable Sensitivity (S/N=30dB) | ≤15dB S/N Ratio: | ≥55dB Stereo Separation | ≥30dB AM RADIO SECTION Frequency Range | (America) 522 – 1620 kHz | (Europe) 530 – 1710 kHz Usable Sensitivity (S/N=20dB) | ≤40dB S/N Ratio: | ≥45dB Line-out / Subwoofer Output Maximum Output Leve (10K ohms load): | ≥4V RMS Subwoofer Time Align | 0~18ms 17
Trouble Shooting Problem | Cause | Correct action No Power, Dead. | Check Fuse | Replace Fuse No Power, Dead. | Incorrect Wiring | Consult your Local Specialist. www.MotorcycleAudio.com/Specialist-Locator No sound output when operating the unit with amplifiers or power antenna attached. | Power antenna lead is shorted to ground excessive current is required or remote on the amplifiers or power antenna | 1. Turn off the unit. 2. Remove all wires attached to the power antenna lead. Check each wire for a possible short to the ground using an ohm meter. 3. Turn on the unit. 4. Reconnect each amplifier remote wire to the power antenna lead one by one. If the amplifiers turn off before all wires are attached, use an external replay to provide remote-on voltage (excessive current required). Poor performance of radio station | Weak signal | Move the Motorcycle to another place, then try again No Sound or Audio | Volume is in minimum The wiring is not properly connected. | Adjust volume to the desired level. Check wiring connection 18
``` FCC Notes WARNING! NOTE: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. However, there is no guarantee that interference will not occur in a particular installation. In that case, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that the receiver is connected. www.MotorcycleAudio.com Follow Us on Social Media 19 ```