Model TMS57 / TMS69
Installation, operation and specifications for TMS57 and TMS69 speakers.
| Description | 2-Way |
|---|---|
| Nominal Impedance (Ohms) | 4Ω |
| Frequency Response (Hz) TMS57 | 63-20kHz |
| Frequency Response (Hz) TMS69 | 56-20kHz |
| Voice Coil Diameter - inch | 1.4 |
| Voice Coil Diameter - mm | (35.6) |
| Power Handling - Watts (RMS/Peak) | 100/200 |
| Fs - Free Air Resonance (Hz) TMS57 | 80Hz |
| Fs - Free Air Resonance (Hz) TMS69 | 75 |
| Qts TMS57 | 1.17 |
| Qts TMS69 | 1.63 |
| Vas - cu. ft. TMS57 | 0.354 |
| Vas - cu. ft. TMS69 | 0.593 |
| Vas - Liter TMS57 | (9.9) |
| Vas - Liter TMS69 | (16.8) |
| Sensitivity (1W/1M) | 89dB |
| Sensitivity (2.83V/1M) | 92dB |
| Xmax - inch | 0.12 |
| Xmax - mm | (3) |
| Mounting Diameter TMS57 | 4.3 x 5 |
| Mounting Diameter TMS69 | 8.6 x 5.6 |
| Mounting Depth TMS57 | 2.2 |
| Mounting Depth TMS69 | 2.8 |
| Grille/Trim Ring | NO |
Source: Installation & Operation Manual, Rockford Fosgate. Wording and values are retained from the supplier document.
The complete text of the Installation & Operation Manual for TMS57 / TMS69 (8 pages), extracted from the supplier PDF; pages without a text layer were transcribed from the page image. Check wiring and settings against the original PDF before cutting or splicing.
RFTECH Installation assistance available at: www.rockfordfosgate.com/rftech POWER SPEAKERS TMS57 • TMS69 ELEMENT READY Serial Number: Date of Purchase: CE 600 South Rockford Drive • Tempe, Arizona 85281 United States Direct: (480) 967-3565 • Toll Free: (800) 669-9899 ROCKFORDFOSGATE.COM Installation & Operation 030818 1230-62234-01-B Printed in China
Introduction
Dear Customer, If, after reading your manual, you still have questions regarding this prod-
uct, we recommend that you see your Rockford Fosgate dealer. If you need
Congratulations on your purchase of the world’s finest brand of audio
further assistance, you can call us direct at 1-800-669-9899. Be sure to
products. At Rockford Fosgate we are fanatics about musical reproduc-
tion at its best, and we are pleased you chose our product. Through
have your serial number, model number and date of purchase available
years of engineering expertise, hand craftsmanship and critical testing when you call.
procedures, we have created a wide range of products that reproduce PRACTICE SAFE SOUND
music with all the clarity and richness you deserve. Continuous exposure to sound pressure levels over 100dB may cause
permanent hearing loss. High powered auto sound systems may
For maximum performance we recommend you have your new Rockford
produce sound pressure levels well over 130dB. Use common sense
Fosgate product installed by an Authorized Rockford Fosgate Dealer,
and practice safe sound.
as we provide specialized training through Rockford Technical Training
Institute (RTTI). Please read your warranty and retain your receipt and
original carton for possible future use. PRATIQUEZ UNE ÉCOUTE SANS RISQUES
Une exposition continue à des niveaux de pression acoustique upérieurs à
Great product and competent installations are only a piece of the puzzle 100 dB peut causer une perte d’acuité auditive permanente. Les systèmes
audio de forte puissance pour auto peuvent produire des niveaux de
when it comes to your system. Make sure that your installer is using pression acoustique bien au-delà de 130 dB. Faites preuve de bon sens et
100% authentic installation accessories from Rockford Fosgate in your pratiquez une écoute sans risques
installation. Rockford Fosgate has everything from RCA cables and
speaker wire to power wire and battery connectors. Insist on it! After all, PRACTIQUE EL SONIDO SEGURO
your new system deserves nothing but the best. El contacto continuo con niveles de presión de sonido superiores a 100
dB puede causar la pérdida permanente de la audición. Los sistemas de
To add the finishing touch to your new Rockford Fosgate image, order sonido de alta potencia para automóviles pueden producir niveles de
your Rockford accessories, which include everything from T-shirts to presión de sonido superiores a los 130 dB. Aplique el sentido común y
practique el sonido seguro.
hats.
Visit our web site for the latest information on all Rockford products;
PRAKTIZIEREN SIE SICHEREN SOUND
Fortgesetzte Geräuschdruckpegel von über 100 dB können beim
www.rockfordfosgate.com Menschen zu permanentem Hörverlust führen. Leistungsstarke
or, in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985. For all other Autosoundsysteme können Geräuschdruckpegel erzeugen, die weit über
countries, call +001-480-967-3565 or FAX +001-480-966-3983. 130 dB liegen. Bitte wenden Sie gesunden Menschenverstand an und
praktizieren Sie sicheren Sound.
Table of Content OSSERVATE LE REGOLE DEL SUONO SENZA PERICOLI
La costante esposizione a livelli di pressione acustica al di sopra dei
2 Introduction 100dB possono causare la perdita permanente dell’udito. I sistemi
3-4 Specifications audio ad alta potenza possono produrre livelli di pressione acustica ben
superiori ai 130dB. Si consiglia il buon senso e l’osservanza delle regole
5 Installation del suono senza pericoli
Installation Considerations
Mounting Safety
6-7 Additional Languages This symbol with “WARNING” is intended
French to alert the user to the presence of important
instructions. Failure to heed the instructions
Spanish
will result in severe injury or death.
German
Italian This symbol with “CAUTION” is intended to
8 Limited Warranty Information alert the user to the presence of important
instructions. Failure to heed the instructions
can result in injury or unit damage.
• To prevent injury and damage to the unit, please read and follow the
instructions in this manual. We want you to enjoy this system, not get
a headache.
• If you feel unsure about installing this system yourself, have it installed
by a qualified Rockford Fosgate technician.
• Before installation, disconnect the battery negative (-) terminal to
prevent damage to the unit, fire and/or possible injury.
©2017 Rockford Corporation. All Rights Reserved. ROCKFORD FOSGATE, PUNCH® and associated logos where applicable are registered trademarks of Rockford
Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Specifications subject to change without notice.
2Specifications
Model TMS57 TMS69
Nominal Diameter - inch 5x7 6x9
(mm) (127 x 178) (152 x 229)
Description 2-Way 2-Way
Nominal Impedance (Ohms) 4Ω 4Ω
Frequency Response (Hz) 63-20kHz 56-20kHz
Voice Coil Diameter - inch 1.4 1.4
(mm) (35.6) (35.6)
Power Handling - Watts
100/200 100/200
(RMS/Peak)
Fs - Free Air Resonance (Hz) 80Hz 75
Qts 1.17 1.63
Vas - cu. ft. 0.354 0.593
(Liter) (9.9) (16.8)
Sensitivity (1W/1M) 89dB 89dB
Sensitivity (2.83V/1M) 92dB 92dB
Xmax - inch 0.12 0.12
(mm) (3) (3)
4.3 x 5 8.6 x 5.6
Mounting Diameter
(185 x 127) (218 x 147)
2.2 2.8
Mounting Depth
(56) (71)
Grille/Trim Ring NO NO
See page 4 for additional dimensions
CEA 2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle
power under continuous demand, not instantaneous power handling that over time can damage voice coils.
VERIFIED WITH KLIPPEL
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be trained and certified by
Klippel prior to using the three separate Klippel systems to design, develop and test. Rockford Fosgate has made the investment in Klippel to
deliver the best possible speakers and subwoofers to their customers.
3Specifications TMS57 7.8” (199mm) 4.7” (119mm) 5.4” (138mm) 4.8” (121mm) 2.6” (66mm) 2.2” (56mm) 4.3” (185mm) 5” (127mm) TMS69 9.2” (234mm) 6.5” (165mm) 6.4” (163mm) 4.7” (120mm) 3.2” (81mm) 2.8” (70mm) 3.2” (81mm) 2.8” (70mm) 8.6” (218mm) 5.6” (147mm) illus.-1.1 4
Installation
Contents Example of standard installation
• (1) Pair TMS Speakers
• (8) Socket head screws
Installation Considerations
Before beginning any installation, follow these simple rules:
Cutout Hole
1. Be sure to carefully read and understand the instructions before
attempting to install these speakers.
2. For safety, disconnect the negative lead from the battery prior to
beginning the installation.
illus.-2.1
3. For easier assembly, we suggest you run all wires prior to mounting
your speakers in place.
4. Use high quality connectors for a reliable installation and to minimize
signal or power loss.
5. Think before you drill! Be careful not to cut or drill into gas tanks, fuel
lines, brake or hydraulic lines, vacuum lines or electrical wiring when
working on any vehicle. If installation in a boat, take care not to cut or
drill through the main hull.
6. Never run wires underneath the vehicle. Running the wires inside the
vehicle or hull area provides the best protection.
7. Avoid running wires over or through sharp edges. Use rubber or
plastic grommets to protect any wires routed through metal, especially
the firewall.
Mounting
1. Determine where the speakers will be mounted. Ensure an area large
enough for the speaker to mount evenly. Be sure that the mounting
location is deep enough for the speaker to fit; if mounting in a door,
operate all functions (windows, locks, etc.) through their entire
operating range to ensure there is no obstruction.
2. Refer to the specification chart to determine the proper diameter hole
to cut for your speaker model. Cutting and mounting templates can be
found at www.rockfordfosgate.com.
3. Mark the locations for the mounting screws. Drill the holes with a
1/8” bit.
4. Feed the speaker wires through the cutout and connect to the speaker
terminals. Be sure to observe proper polarity when connecting the
wires.The speaker’s positive terminal is indicated with a “+”.
5. Fit the trim ring over the speaker and mount into place using four (4)
screws.
6. Tighten the screws until the speaker is snug in place to prevent
rattling. Do not over tighten the screws.
5Français Español
Considérations Concernant L’installation Consideraciones para la instalación
Avant de commencer l’installation, suivez les règles ci-dessous: Antes de comenzar cualquier instalación, siga estas simples normas:
1. Veillez à bien lire et comprendre les instructions avant d’essayer 1. 1. Asegúrese de leer cuidadosamente y de entender las instrucciones
d’installer les haut-parleurs. antes de tratar de instalar estos altavoces.
2. Par mesure de sécurité, débranchez le fil négatif de la batterie avant de 2. Por seguridad, desconecte el conductor negativo de la batería antes
commencer l’installation. de comenzar la instalación.
3. Pour faciliter le montage des haut-parleurs, il est conseillé d’installer 3. Para facilitar el montaje, sugerimos que tienda todos los cables antes
tous les câbles au préalable. de montar sus altavoces en su sitio.
4. Utilisez des connecteurs de haute qualité pour assurer une installation 4. Utilice conectores de alta calidad para tener una instalación confiable
fiable et réduire au minimum la perte de signal ou de puissance. y para reducir al mínimo las pérdidas de señal o de potencia.
5. Réfléchissez bien avant de percer.Veillez à ne pas couper ou percer 5. ¡Piense siempre antes de perforar! Tenga cuidado de no cortar ni
le réservoir d’essence, le câblage électrique ou les conduites de perforar en tanques de combustible, tuberías de combustible, frenos
carburant, de freinage hydraulique ou de dépression en travaillant o hidráulicas, tuberías de vacío o cableado eléctrico al trabajar en un
sur un véhicule. En cas d’installation sur un bateau, veillez à ne pas vehículo. Si la instalación se hace en un bote, tenga cuidado de no
couper ou percer la coque principale. cortar ni perforar a través del casco principal.
6. Ne jamais faire passer de fils sous le véhicule. Leur installation à 6. Nunca tienda cables abajo del vehículo.Tender los cables adentro del
l’intérieur du véhicule ou de la coque assure la meilleure protection. vehículo o casco proporciona la mejor protección.
7. Évitez de faire passer des fils sur des bords tranchants ou dans 7. Evite tender cables arriba o a través de bordes filosos. Use arandelas
des orifices à arêtes vives. Utilisez des bagues en caoutchouc ou aislantes de caucho para proteger los cables tendidos a través de
en plastique pour protéger les fils traversant une plaque de métal, metal, especialmente la mampara cortafuegos.Montage
notamment le tablier.Emplacements De Montage
Montaje
Montage
1. Determine adónde se montará los altavoces.Asegúrese de que haya un
1. Déterminez l’emplacement des haut-parleurs.Veillez à ce que la área suficientemente grande para montar de manera plana el altavoz.
surface plane soit assez grande pour assurer un contact uniforme Asegúrese de que el lugar de montaje sea suficientemente profundo
du haut-parleur.Vérifiez que l’emplacement est assez profond pour le para que quepa el altavoz, si se monta en una puerta, accione
haut-parleur ; en cas de montage dans une portière, actionnez toutes todas las funciones (ventanas, cerradura, etc.) en toda su gama de
les commandes (fenêtres, serrures, etc.) jusqu’aux extrémités de leurs funcionamiento para asegurarse de que no haya obstrucciones.
courses pour vous assurer qu’il n’y a pas d’obstruction.
2. Consulte la tabla de especificaciones para determinar cuales son
2. Consultez le tableau des caractéristiques pour déterminer le diamètre los diámetros correctos para el agujero a cortar para su modelo de
de l’orifice à découper pour votre modèle de haut-parleur. Le gabarit altavoz. La plantilla proporcionada también le da la medida correcta
fourni donne aussi le bon diamètre de découpe.Les gabarits de coupe del recorte.Se puede hallar las plantillas para el corte y el montaje en
et de montage sont disponibles sur la page www.rockfordfosgate. www.rockfordfosgate.com/rftech.
com/rftech.
3. Marque las localidades para los tornillos de montaje. Perfore los
3. Marquez l’emplacement des vis de montage. Percez les trous avec une agujeros usando una broca de 1/8 pulg.
mèche de 1/8 de pouce (3,2 mm).
4. Tienda los cables del altavoz a través del recorte y conecte a los
4. Faites passer les fils de haut-parleur à travers l’orifice découpé et terminales del altavoz.Asegúrese de usar la polaridad correcta al
branchez-les aux bornes du haut-parleur.Veillez à bien respecter la conectar los cables. El terminal positivo del altavoz está identificado
polarité lors du branchement. La borne positive du haut-parleur est con un símbolo “+”.
indiquée par un « + ».
5. Coloque el anillo de acabado arriba del altavoz y móntelo en su sitio
5. Disposez l’anneau de garniture sur le haut-parleur et fixez-le avec usando cuatro (4) tornillos.
quatre (4) vis.
6. Apriete los tornillos hasta que el altavoz esté ajustado en su sitio para
6. Serrez les vis jusqu’à ce que le haut-parleur soit bien ajusté, de façon evitar vibraciones. No apriete demasiado los tornillos.
à prévenir tout cliquetis, mais évitez tout serrage excessif..
6Deutsch Italiano
Einbauüberlegungen Considerazioni sull’installazione
Befolgen Sie vor dem Einbau diese einfachen Regeln: Prima di iniziare qualsiasi operazione d’installazione, vi consigliamo di
seguire queste semplici regole:
1. 1. Lesen Sie die Anleitung sorgfältig, bevor Sie versuchen diese
Lautsprecher einzubauen. 1. Assicuratevi di aver letto tutte le istruzioni con cura e di averle capite
prima di effettuare qualsiasi tentativo d’installazione neiconfronti
2. Entfernen Sie vor dem Einbau aus Sicherheitsgründen das negative dell’unità.
Kabel von der Batterie.
2. Per motivi di sicurezza, scollegate il cavo negativo dalla batteria prima
3. Um die Montage zu erleichtern, empfehlen wir alle Kabel vor der di dare l’avvìo all’installazione.
Befestigung Ihrer Lautsprecher zu verlegen.
3. Per facilitare il montaggio, vi suggeriamo di far scorrere tutti i fili
4. Verwenden Sie nur Qualitätsstecker, um einen zuverlässigen Einbau prima di montare la vostra unità nella sua ubicazione.
zu gewährleisten und Signal- und Stromverlust zu minimieren.
4. Usate connettori di alta qualità per garantire un’installazione che dà
5. Denken Sie nach, bevor Sie bohren! Achten Sie darauf, nicht affidamento e per ridurre al minimo la perdita di segnali o di potenza.
in den Benzintank, die Benzin-, Brems- oder hydraulischen
Leitungen,Vakuumleitungen oder Elektrokabel zu schneiden oder zu 5. State attenti prima di trapanare! Cercate di non trapanare e di non
bohren,wenn Sie am Fahrzeug arbeiten.Achten Sie beim Einbau in incidere i serbatoi della benzina; le condutture del carburante, dei
einem Boot darauf, nicht durch den Bootsrumpf zu schneiden oder freni, del sistema idraulico e a depressione; nonché i fili elettrici
zu bohren. quando state lavorando su qualsiasi veicolo.
6. Verlegen Sie Kabel nie unter dem Fahrzeug. Die Kabel im Fahrzeug 6. Non fate mai scorrere i fili sotto il veicolo.Avrete la protezione migliore
oder Bootsrumpf zu verlegen, bietet den besten Schutz. faccendo scorrere i fili all’interno del veicolo.
7. Vermeiden Sie es, Kabel über scharfe Kanten zu verlegen.Verwenden 7. Evitate di far scorrere i fili sopra o attraverso delle estremità affilate.
Sie Gummi- oder Plastikringe, um Kabel zu schützen, die durch Usate guarnizioni di tenuta in gomma o in plastica per proteggere
Metall verlegt werden (besonders die Feuerwand). qualsiasi filo che passi attraverso del metallo, soprattutto il
parafiamma.
Befestigung
1. Entscheiden,wo die Lautsprecher befestigt werden sollen. Montaggio
Gewährleisten, dass der Platz ausreicht, um den Lautsprecher 1. Decidete dove montare gli altoparlanti.Assicuratevi che sia un’area
gleichmäßig zu befestigen. Gewährleisten, dass die Befestigungsstelle abbastanza grande per poter montare l’altoparlante a livello e
ausreichende Tiefe für den Lautsprecher hat; beim Einbau in einer abbastanza profonda per poterlo collocare comodamente. Se lo
Türe alle Funktionen (Fenster, Schloss usw.) in ihrem ganzen Bereich montate all’interno di uno sportello, controllate tutte le funzioni
ausprobieren um zu gewährleisten, dass keine Blockierung eintritt. (finestre, serrature, ecc.), una alla volta, per assicurarvi che non ci
2. Die Tabelle in den Technischen Daten gibt den richtigen siano ostruzioni.
Lochdurchmesser für Ihr Lautsprechermodell zum Ausschneiden 2. Fate riferimento alla tabella delle specifiche per stabilire il diametro
an. Die beiliegende Schablone zeigt ebenfalls die richtige corretto del foro che dovrete praticare per il modello del vostro
Ausschneidegröße an.Schneide- und Befestigungsschablonen finden altoparlante.Si possono trovare le sagome per il taglio e il montaggio
Sie unter www.rockfordfosgate.com/rftech. presso www.rockfordfosgate.com/rftech.
3. Die Stellen für die Befestigungsschrauben markieren. Die Löcher mit 3. Marcare le posizioni per le viti di montaggio. Praticare i fori con una
einer 1/8-Zoll (3,2 mm) Bohrerspitze bohren. punta da trapano di 1/8 di pollice (3,2 mm).
4. Die Lautsprecherkabel durch das Loch führen und an den 4. Passare i cavi del diffusore tramite l’apertura e collegarli ai terminali.
Lautsprecherausgängen anschließen. Beim Anschließen der Kabel Verificare che la polarità sia corretta quando si collegano i cavi. Il
die ordnungsgemäße Polarität beachten. Der positive Anschluss des terminale positivo del diffusore è identificato dal “+”.
Lautsprechers ist mit einem „+“ markiert.
5. Adattare l’anello di finitura sul diffusore e montare in posizione
5. Den Zierring über den Lautsprecher legen und mit 4 (vier) Schrauben servendosi delle quattro (4) viti.
an seinem Platz befestigen.
6. Per evitare rumore dovuto a vibrazioni serrare le viti finché il
6. Die Schrauben anziehen, bis der Lautsprecher eng an seinem Platz diffusore non sia saldamente in posizione. Non serrare le viti in modo
anliegt, um Klappern zu verhindern. Die Schrauben nicht zu fest eccessivo..
anziehen..
7Warranty
Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms:
Length of Warranty
POWER Amplifiers – 2 Years
BMW® Direct Fit Speakers – 2 Years
Source Units – 2 Years
All other products – 1 Year
Any Factory Refurbished Product – 90 days (receipt required)
What is Covered
This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or
its possessions. Product purchased by consumers from an Authorized Rockford Fosgate Dealer in another country are covered only by that country’s
Distributor and not by Rockford Corporation.
Who is Covered
This warranty covers only the original purchaser of Rockford product purchased from an Authorized Rockford Fosgate Dealer in the United States. In order
to receive service, the purchaser must provide Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and date of
purchase.
Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Rockford’s discretion.
What is Not Covered
1. Damage caused by accident, abuse, improper operations,water, theft, shipping.
2. Any cost or expense related to the removal or reinstallation of product.
3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center.
4. Any product which has had the serial number defaced, altered, or removed.
5. Subsequent damage to other components.
6. Any product purchased outside the U.S.
7. Any product not purchased from an Authorized Rockford Fosgate Dealer.
Limit on Implied Warranties
Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express warranty set forth
above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for
Rockford Fosgate any other liability in connection with the sale of the product.
How to Obtain Service
Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford
Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of
product to Rockford.
EU Warranty
This product meets the current EU warranty requirements, see your Authorized dealer for details.
8