RFK-HD9813 — Amplifier Tuning Guide, page 1
1998-2013 Harley-Davidson® TM400X4ad Amplifier Tuning 2nd Generation Kits Using RFK-HD9813 Harness Kit. MOTORCYCLE AUDIO #ROCKFORDFOSGATE Harman-Kardon Factory Radio RADIO O.K. no flash required TURN-ON O.K. remote wire not required REAR INPUT LEVEL: 9:00 (1/4) Matches the amp to the radio. Tells the amp where to "clip." FRONT INPUT LEVEL: MIN to 9:00 When using baglids or TourPak, reduce fairing speaker output by trimming level until front & rear are equally balanced. FRONT & REAR EQUALIZER: MIN Adds bass & treble to enclosed vehicles. Not used on motorcycles. INPUT SWITCH: 4CH Number of inputs to feed amp. Requires rear speaker harness included in RFK-HD9813 for 4-channel fading. CROSSOVER FREQUENCY: 80Hz Tells amp what frequencies to pass. Motorcycles use this as a "bass blocker" to prevent subwoofer frequencies from damaging fairing and baglid speakers. (works with HP/AP/LP switch) CROSSOVER SWITCH: HP (High-Pass) Type of crossover needed. (works with crossover frequency dial) [HP (High-Pass) allows frequencies above to pass] [AP (All-Pass) allows all frequencies to pass] [LP (Low-Pass) allows frequencies below to pass] 09-06-2019 Eric Russell 1220-72884-03-A
