1998–2013 PMX-HD9813 Stage System Tuning

Full document text

The complete text of the Radio Tuning Guide for PMX-HD9813 (2 pages), extracted from the supplier PDF; pages without a text layer were transcribed from the page image. Check wiring and settings against the original PDF before cutting or splicing.

```
1998-2013 Harley-Davidson®
PMX-HD9813 Radio Tuning Guide for
STAGE1, STAGE2 & STAGE3 Systems.
```

```
MOTORCYCLE AUDIO
#ROCKFORDFOSGATE
```

```
FLAT: Use on non-Rockford Fosgate systems.
```

```
RADIO DEFAULTS
```

```
AUDIO KIT PRESET:
These tunings are optimized ONLY
for Rockford Fosgate TM400X4ad
amplifiers & TMS speakers due to
their unique frequency response.
They are not for use with other
speaker and/or amplifier brands.

1) Press & Hold MENU to
   access SETTINGS.

2) Rotate VOLUME,
   press to select AUDIO.

3) Rotate VOLUME, press to
   select AUDIO KIT PRESET.

4) Radio will automatically
   reboot & load preset.
```

```
TURN
OVER
```

```
STAGE1:
Upper Fairing

HD9813SG-STAGE1
HD9813SG-STAGE2

HD9813RG-STAGE1
HD9813RG-STAGE2
```

```
STAGE2:
Upper Fairing + Baglids

HD9813SG-STAGE3

HD9813RG-STAGE3
```

```
STAGE3:
Upper Fairing + TourPak
Upper Fairing + TourPak + Baglids

HD9813SGU-STAGE1
HD9813SGU-STAGE2
HD9813SGU-STAGE3

HD9813RGU-STAGE1
HD9813RGU-STAGE2
HD9813RGU-STAGE3
```

```
7 BAND EQ: FLAT
```

```
CROSSOVER:
 FRONT HPF: 60Hz @ 12dB/Oct.
 REAR HPF: 60Hz @ 12dB/Oct.
 SUB LPF: APF
```

```
PUNCH EQ: GAIN 0
```

```
AUDIO SETTINGS
CROSSOVER
PUNCH EQ
AUX INPUT
SOURCE GAIN
INTERNAL AMPLIFIER
```

```
INTERNAL AMPLIFIER: ON
```

```
09-03-2019  Eric Russell
1220-72885-01-A
```

```
1998-2013 Harley-Davidson®
TM400X4ad Amp Tuning Guide for PMX-HD9813
on STAGE2 & STAGE3 Systems.
For other radios, refer to Knowledge Base Answer ID #1355.

Rockford Fosgate
PMX-HD9813

MOTORCYCLE AUDIO
#ROCKFORDFOSGATE

RADIO O.K.
no flash required

TURN-ON O.K.
blue remote wire not required

REAR INPUT LEVEL: 9:00 (1/4)
Matches the amp to the radio.
Tells the amp where to "clip."

FRONT INPUT LEVEL: 8:00 to 9:00
When using baglids or TourPak,
reduce fairing speaker output
by trimming front gain so front
& rear are equally balanced.

FRONT & REAR EQUALIZER: 12:00
Works with PMX-HD9813 DSP
to provide exceptional
bass & treble response.

INPUT SWITCH: 4CH
Number of inputs to feed amp.
New harness supports
integrated 4-channel
front/rear audio.
Must use rear speaker
harness on PMX-HD9813.

CROSSOVER FREQUENCY: 50Hz
Tells amp what frequencies to pass.
Motorcycles use this as a "bass blocker"
to prevent subwoofer frequencies from
damaging fairing and baglid speakers.
(latched to HP/AP/LP switch)

CROSSOVER SWITCH: HP (High-Pass)
Type of crossover needed.
(works with crossover frequency dial)

[HP (High-Pass) allows frequencies above to pass]
[AP (All-Pass) allows all frequencies to pass]
[LP (Low-Pass) allows frequencies below to pass]

TURN
OVER

FRONT
REAR
IN
CLIP
OUT
MIN
MAX
INPUT LEVEL
CLIP
OUT
MIN
MAX
INPUT LEVEL
EQ
MIN
MAX
EQ
MIN
MAX
2CH
4CH
LP
HP
Hz
FREQ
50
250
LP
HP
Hz
FREQ
50
250
POWER
PWR
TM400X4ad

Rockford Fosgate

09-03-2019  Eric Russell
1220-72885-01-A
```