Road-Lock™ Amplifier Brackets for Harley Road King & Softail
The hidden hardware that makes big-power stereos possible on unfaired Harleys.
On a fairing bike, the amplifier has a home: inside the fairing, behind a factory radio cavity. On a Road King® or Softail®, there is no such luxury. No inner fairing, no radio pocket, no obvious place to mount a high-power amp that will survive real miles.
The Road-Lock™ amplifier bracket system is the missing piece. It gives your amplifier a secure, engineered mounting location on unfaired Harleys, with proper mechanical support, cooling, and wiring—all designed around Havoc Roar Stereo systems powered by Aquatic AV. Without Road-Lock, big-power audio on a naked bike is a compromise. With Road-Lock, it's a platform.
The Problem: Big Power, No Fairing
On bikes without a fairing, riders and installers are often left improvising:
- Amps stuffed into saddlebags with no mechanical support
- Brackets stuck on with double-sided tape or flimsy hardware
- Poor airflow and heat build-up
- Installs that are hard to service and easy to damage
Road-Lock™ was built to fix that.
It gives the amplifier a purpose-built, repeatable mounting solution that ties into the bike, not just whatever surface was handy.
Meet Road-Lock™: Purpose-Built Amp Mounting for Naked Harleys
The Road-Lock™ amplifier bracket system is a model-specific, engineered mount for Havoc Roar Stereo amplifiers on:
- Harley-Davidson® Road King®
- Harley-Davidson® Softail® models
Instead of treating the amplifier as an afterthought, Road-Lock makes it part of the structure:
- A dedicated mounting bracket designed around the amp's size, weight, and cooling
- Proper stainless steel fasteners and backing, so the amplifier is bolted, not taped
- Space and routing designed for loomed power and signal harnesses
- Easy access for service, tuning, and upgrades
This is the piece that made it possible to design full 2, 4, and 6-speaker Havoc Roar Stereo systems for unfaired bikes, with real amplifier power and a professional, repeatable install.
Road-Lock™ for Road King®
On the Road King, Road-Lock is designed around the realities of a naked touring chassis:
- No fairing space
- Side covers already busy
- Heavy suspension travel, big miles, real-world vibration
The Road-Lock Road King bracket:
- Provides a dedicated amplifier mounting location tied into the bike, not just the bag wall
- Keeps the amp off the floor of the saddlebag and away from loose gear
- Is engineered with clearance for bag lids, liners, and wiring
- Positions the amplifier for airflow and cooling, even under load
- Works with the Havoc Roar Stereo harness so power, ground, and signal are cleanly managed
The result is a high-power Road King stereo that feels like it was designed with an amp from the factory—because now it effectively was.
Road-Lock™ for Softail®
Softails bring their own challenges. The Road-Lock Softail bracket is designed around Softail geometry:
- Model-specific mounting that respects Softail frame lines and luggage layouts
- A solid, vibration-resistant anchor for the amplifier on an unfaired chassis
- Clean routing for power, ground, and speaker harnesses to bars, highway bar pods, and saddlebags
- Serviceability in mind—access to fuses, connections, and tuning without tearing the bike apart
Paired with the Softail-specific Havoc Roar Stereo systems, the Road-Lock bracket turns a naked Softail into a platform for real, repeatable big-power installs—not one-off experiments.
Matched Wiring Harnesses & Amp Integration
Road-Lock is the backbone for a complete amplifier integration:
- Power and ground harnesses sized to match the amplifier output
- Fuse protection located where it belongs, near the battery
- Speaker harnesses pre-loomed and routed for each Havoc Roar Stereo configuration
- Connectors and cable lengths chosen for Road King and Softail layouts, not generic use
Combined with the Road-Lock bracket, the amplifier and harnesses form a single system:
- No guessing at wire gauge or fuse size
- No running random cable through the bike
- No wondering if the amp is getting the current it needs
You get a stereo system that isn't just louder—it's electrically correct and mechanically secure.
Key Specs
| Fitment | Harley-Davidson Road King (saddlebag mount) and Softail models (frame / saddlebag support mount); model-specific brackets |
|---|---|
| Compatible amplifiers | Havoc Roar Stereo amplifiers powered by Aquatic AV |
| Materials | Dedicated amplifier bracket with stainless steel fasteners and backing |
| What's included | Model-specific Road-Lock bracket and stainless hardware; pairs with matched power, ground and pre-loomed speaker harnesses with battery-side fuse protection |